2savage Posted November 19, 2007 Share Posted November 19, 2007 I have a 2.8 engine in my 240z with a triple weber carb conversion and other mods. So, I'm rebuilding things under the hood and can't remember what goes to the tube which is at the front of the engine on the drivers side below the distributor. The tube sticks out about 4" from the engine block. I'm pretty sure it's not heater related because those are both on the passenger side. Can someone help? Quote Link to comment Share on other sites More sharing options...
naviathan Posted November 19, 2007 Share Posted November 19, 2007 It's the PCV tube and it use to go in the bottom of the L28 intake where the PCV valve is at. Quote Link to comment Share on other sites More sharing options...
Dragonfly Posted November 19, 2007 Share Posted November 19, 2007 naviathan is right, on mine I just put a filter since I no longer had an attachment to a filter housing. Dragonfly Quote Link to comment Share on other sites More sharing options...
2savage Posted November 19, 2007 Author Share Posted November 19, 2007 Excellent. Thanks guys Quote Link to comment Share on other sites More sharing options...
JSM Posted November 21, 2007 Share Posted November 21, 2007 naviathan is right, on mine I just put a filter since I no longer had an attachment to a filter housing. Dragonfly Intresting water pump there. Electric, but via an external motor. Notice any difference without the belts on the crank pully? Quote Link to comment Share on other sites More sharing options...
JSM Posted November 21, 2007 Share Posted November 21, 2007 By the way, I love your magic Coil with no wires going to it. Quote Link to comment Share on other sites More sharing options...
janaka Posted November 21, 2007 Share Posted November 21, 2007 i always wondered that too. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.