cyrus Posted January 2, 2003 Share Posted January 2, 2003 I am in any OEM 4 lug wheels that will work. 15" x 7 or 15 x 6 would be nice. cyrus Quote Link to comment Share on other sites More sharing options...
Mudge Posted January 2, 2003 Share Posted January 2, 2003 If you haven't seen the list on 240z.org I can dig it up again. Quote Link to comment Share on other sites More sharing options...
cyrus Posted January 2, 2003 Author Share Posted January 2, 2003 Mudge, I tried, can you please dig up list? Thanks Quote Link to comment Share on other sites More sharing options...
Guest Phil1934 Posted January 2, 2003 Share Posted January 2, 2003 I'd be interested. I planned to send my centers to www.stocktonwheel.com. They have 15" rims with a deeper center that can mount to 14" centers. Vintiques does this, too. Quote Link to comment Share on other sites More sharing options...
cyrus Posted January 2, 2003 Author Share Posted January 2, 2003 DAW, If I bolt use 300zx front hubs and redrill the rear will the conquest rims bolt right up with the correct offsets??? cyrus Quote Link to comment Share on other sites More sharing options...
Mudge Posted January 3, 2003 Share Posted January 3, 2003 Here is some info, however its for four lug. http://www.240z.org/forums/showthread.php?s=&threadid=3047 Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted January 6, 2003 Share Posted January 6, 2003 Here is the best info on the subject: http://kmhafer.datsun510.com/wheelFAQ.htm Quote Link to comment Share on other sites More sharing options...
cyrus Posted January 7, 2003 Author Share Posted January 7, 2003 DAW, I bought a set of 87 conquest 15x6 1/2" rims for the rear of my 240z. They fit the rear but not the front. DOH! Will the 8" conquest front wheels fit on the front of the 240z with 300zx hubs (what year?). Will the 9" conquest fit on the rear. I read they are 9 with a 0 offset. which would make the back spacing 5 inches. Quote Link to comment Share on other sites More sharing options...
Trevor Posted January 7, 2003 Share Posted January 7, 2003 I read on a Mazda RX-7 page that these cars have the 4 x 4.5" bolt circle and 15"x6" wheels. Nissan 240SX Toyota Cressida '85-'88 Quote Link to comment Share on other sites More sharing options...
cyrus Posted January 7, 2003 Author Share Posted January 7, 2003 As far as the 5 lug 300zx front hubs... what years work? does it just bolt on? Quote Link to comment Share on other sites More sharing options...
fl327 Posted January 8, 2003 Share Posted January 8, 2003 84 4lug 300zx fit. Quote Link to comment Share on other sites More sharing options...
cyrus Posted January 8, 2003 Author Share Posted January 8, 2003 No no... I want to use the largest wheels possible, so I need the 5 lug to make the conquest 8" or 9" wheels. I want to know which ones to get and what it requires. Quote Link to comment Share on other sites More sharing options...
ZROSSA Posted January 8, 2003 Share Posted January 8, 2003 Your going to have to ask yourself if its more cost effective to change over to 5 lugs of just get some custom wheels made for the standard set up. If you did the 5 lug swap you could then use mustang wheels, couldnt you? You could get some really large ones then. Douglas Quote Link to comment Share on other sites More sharing options...
Mudge Posted January 8, 2003 Share Posted January 8, 2003 Just a couple price points, you can get wheels widened for about $100 each (IIRC?), or custom lightweight racing wheels to YOUR specs are about $1600 for all 4 from CCW. Largest wheels possible (insert maniacal laughter here)... 17x11" sounds nice, expensive tires though. www.fastassdatsun.com For $2000-$3000 you could put big wheels/tires and new front/rear suspension on the car, and the C4 IRS is lighter, and I dont think G forces are going to break 'em either. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.