smoorenc Posted February 8, 2008 Share Posted February 8, 2008 Hi Guys, I am rebuilding my hinges and I am missing the roller pin and roller pin bushing. Its the pin that the slide bar connected to the spring rolls up against to keep your door open. I can't seen to find the part # or where to get one. Does anyone know? Here is a picture of the roller pin: Thanks! Scott Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted February 8, 2008 Share Posted February 8, 2008 A quote from this thread: http://forums.hybridz.org/showthread.php?t=117283 I rebuilt mine. It worked fine. Nissan Bushing #80410-01G00, Nissan Pin #80406-V5002 are the replacement parts that I used. You will need to shorten the new pin. Quote Link to comment Share on other sites More sharing options...
smoorenc Posted February 8, 2008 Author Share Posted February 8, 2008 Hey Matt, how's it going. I got those parts already to rebuild the hinges, the roller pin and roller were broke off a long time ago. So they are missing and I can't find the parts or part #'s anywhere. Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted February 8, 2008 Share Posted February 8, 2008 I have about 6 sets of door hinges but I wont be home for a week or so. Maybe on my way back to school next weekend we can meet up and you can look at some. Quote Link to comment Share on other sites More sharing options...
smoorenc Posted February 8, 2008 Author Share Posted February 8, 2008 That would be great! You are the MAN! Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted February 9, 2008 Share Posted February 9, 2008 I will get with you sometime next weekend and shoot you a PM if I can dig them up. Quote Link to comment Share on other sites More sharing options...
jkeese01 Posted October 20, 2011 Share Posted October 20, 2011 (edited) Late reply, but just found out these part numbers this week. Nissan Pins part# 80406-V5002 Nissan Pin Bushings part# 80410-01G00 Or from Advanced Auto Parts: the bushing and pin kit is Dorman part # 38397. www.mcmaster.com Part# 8491A202 - the roller Z Tech Tips Rebuilding Door Hinges on 1st Generation Z Car http://atlanticz.ca/...hinge/index.htm Hi Guys, I am rebuilding my hinges and I am missing the roller pin and roller pin bushing. Its the pin that the slide bar connected to the spring rolls up against to keep your door open. I can't seen to find the part # or where to get one. Does anyone know? Here is a picture of the roller pin: Thanks! Scott Edited October 21, 2011 by jkeese01 Quote Link to comment Share on other sites More sharing options...
jkeese01 Posted October 24, 2011 Share Posted October 24, 2011 (edited) Updated to the above posting: Nissan Pins part# 80406-V5002 Nissan Pin Bushings part# 80410-01G00 Or from Advanced Auto Parts: the bushing and pin kit is Dorman part # 38397. www.mcmaster.com Part# 8491A202 - the roller These Pins can not be used as the Roller Pin. Try to reuse the one on the car. Image of Roller Pin and Stop Arm Pin: Roller Pin Image Z Tech Tips Rebuilding Door Hinges on 1st Generation Z Car http://atlanticz.ca/...hinge/index.htm Edited October 24, 2011 by jkeese01 Quote Link to comment Share on other sites More sharing options...
DuoWing Posted April 2, 2012 Share Posted April 2, 2012 I know this is kind of bringing this thread back, but I was curious if anyone has fixed their hinges using the Dorman pin/bushing set? I see in the atlanticz.ca link that he mentions using a NAPA part for Nissan trucks but saying it has slack in the bushings/pins and he ended up using the Nissan parts. My driver's door hinges are in serious need of rebuild. I ordered the rollers from mcmaster-carr and I'm trying to figure out if I should order the Nissan parts or just get the Dorman ones. Quote Link to comment Share on other sites More sharing options...
jkeese01 Posted April 2, 2012 Share Posted April 2, 2012 The Dorman pins are only for attaching the asembly to the frame of the car. The roller pin is totally different. I was not able to find a new roller pin anywhere. Hopefully you can reuse the roller pin with the new roller from McMaster-Carr. I know this is kind of bringing this thread back, but I was curious if anyone has fixed their hinges using the Dorman pin/bushing set? I see in the atlanticz.ca link that he mentions using a NAPA part for Nissan trucks but saying it has slack in the bushings/pins and he ended up using the Nissan parts. My driver's door hinges are in serious need of rebuild. I ordered the rollers from mcmaster-carr and I'm trying to figure out if I should order the Nissan parts or just get the Dorman ones. Quote Link to comment Share on other sites More sharing options...
DuoWing Posted April 3, 2012 Share Posted April 3, 2012 The Dorman pins are only for attaching the asembly to the frame of the car. The roller pin is totally different. I was not able to find a new roller pin anywhere. Hopefully you can reuse the roller pin with the new roller from McMaster-Carr. I was just wondering if these work good and hold tight for holding the hinges together. Like I said in the atlanticz.ca link he mentions there being slack between the bushings and pin when assembled. So I didn't know if this would have the same issue or if these hold tight with little to no play at the pivot point? On my hinges it's the roller that's completely shot and the door is starting to sag. I'll probably go ahead and get a set and see how it works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.