grumpyvette Posted April 28, 2008 Share Posted April 28, 2008 http://www.gofastnews.com/board/technical-articles/30-manifold-mania.html Quote Link to comment Share on other sites More sharing options...
pparaska Posted May 8, 2008 Share Posted May 8, 2008 Funny you mention that, as I was wondering if the Power Plus (Professional Products) Air Gap was a decent way to go. I want to try a dual plane, since the overlap I'm running on the existing cam is a bit hairy (I had Vizard spec it for me too) and I needed more low end response at cruise than it was giving me with the Victor JR. I looked ALL OVER the internet, and for some reason only thought to look at David's site after a bit of looking. There was the answer - all those manifolds are about the same. As it is, the Edelbrock version is about $210 (heard the price was going up) and you can get the Professional Products version PN 52026 that David tested for about $144 + shipping from CNC-Motorsports. That's the way I'm going to go. Quote Link to comment Share on other sites More sharing options...
dr_hunt Posted May 8, 2008 Share Posted May 8, 2008 I've bought some stuff from CNC motorsports, top notch IMO. Very good place to buy from. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.