3.6z Posted May 1, 2008 Share Posted May 1, 2008 Hey guys what type of driveshaft are you guys using with the z31 or 280zxt rearend? i've search, but couldn't come up with a clear answer. Quote Link to comment Share on other sites More sharing options...
Z-Gad Posted May 1, 2008 Share Posted May 1, 2008 I used a 3" steel driveshaft. A good driveshaft shop can make one for you if you provide the Yoke you need and the center to center u-joint length you require. Mike Quote Link to comment Share on other sites More sharing options...
RUSSJZ-ZED Posted May 2, 2008 Share Posted May 2, 2008 Something else to be aware of. The R180, and R200s I have that were from 260Z/280Zs have a 50mm recess in the diff flange to match the drive shaft flange on the uni. I only have this pic of 2 spare diffs(R180 on the left, R200 on the right, sorry don't have a driveshaft pic.)50mm recess indicated. the diff flange from a Z31 has a different size recess,the flange is larger,the one I measured was 58mm (don't know about the 280ZX) Make sure you get the correct matching driveshaft uni end when you find a diff. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.