blu240z Posted May 25, 2008 Share Posted May 25, 2008 Im running a P90 head on a f54 block.If i use the N42 head where do i hook up the cylinder had temp sensor,since the N42 head does not need one.do i need to use cylinder temp sensor,or can i leave it disconnected. Quote Link to comment Share on other sites More sharing options...
mobythevan Posted May 26, 2008 Share Posted May 26, 2008 In that case you can use a GM coolant temp sensor and locate it in the thermostat housing, re-tap one of the old sensor threaded holes that is there to 3/8 NPT. Quote Link to comment Share on other sites More sharing options...
evildky Posted May 26, 2008 Share Posted May 26, 2008 the CHTS is located in the lower thermostat housing on at least one of the other heads, just put a datsun CHTS there, and if you locate the correct housing it's already there Quote Link to comment Share on other sites More sharing options...
SidWell Posted May 27, 2008 Share Posted May 27, 2008 the CHTS is located in the lower thermostat housing on at least one of the other heads, just put a datsun CHTS there, and if you locate the correct housing it's already there Here is a link with easytherm calibration values for the 280z coolant sensor: http://forums.hybridz.org/showthread.php?t=123905 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.