Guest Anonymous Posted July 16, 2001 Share Posted July 16, 2001 Does anyone have a extra set of cv adapters that Scottie had made. I need one !! Scottie, could any more of these be made even if the price is more? Thanks Dan Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted July 16, 2001 Share Posted July 16, 2001 I stated a couple of days ago that if there was enough demand, minimum 10 pairs, that I would work with the machinist to do another run. I expect a slight increase in the cost of making them and considering some of the other adaptors I see being made (rear disc brakes, e.g.), the price SHOULD be in the $145/pr. I have not and probably will not speak with the machinist until I see that there is enough interest. If memory serves me right, I recall 3 up to this point. [ July 16, 2001: Message edited by: Scottie-GNZ ] Quote Link to comment Share on other sites More sharing options...
pparaska Posted July 16, 2001 Share Posted July 16, 2001 One set for me. Quote Link to comment Share on other sites More sharing options...
Guest KraZ4spd Posted July 16, 2001 Share Posted July 16, 2001 CV adaptors for what? Or should I say what to what? Quote Link to comment Share on other sites More sharing options...
pparaska Posted July 16, 2001 Share Posted July 16, 2001 280ZX Turbo halfshaft outer joint to the 240-280Z companion flange. Quote Link to comment Share on other sites More sharing options...
Guest KraZ4spd Posted July 16, 2001 Share Posted July 16, 2001 I might want a set. I've got to find the rear end that I'm going to go with. That's why I'm asking so many questions about LSD. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted July 16, 2001 Share Posted July 16, 2001 Scottie, I will buy two to help get these things made asap. Payment in advance will be given with joy. thanks Dan Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted July 17, 2001 Share Posted July 17, 2001 If you need me to be a tie=breaker let me know. I am not in the situation to buy the LSD, cvs or anything like that. however, im sure ill be kicking my own arse for along time if i pass it up and miss my chance! Scottie, will i break U=joints in my car? Thanks= evan Quote Link to comment Share on other sites More sharing options...
Mikelly Posted July 17, 2001 Share Posted July 17, 2001 Put me down for another set, as I think one of mine may not work... Mike Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted July 17, 2001 Share Posted July 17, 2001 Mike, did you ever determine what caused that one to not work? Quote Link to comment Share on other sites More sharing options...
Mikelly Posted July 17, 2001 Share Posted July 17, 2001 Not 100% sure it won't, but I'd like to be safe and have a spare part sitting on the shelf is possible.... I need to have this one put on a laith and checked for zero balance... It may be fine. Mike Quote Link to comment Share on other sites More sharing options...
Guest KraZ4spd Posted July 17, 2001 Share Posted July 17, 2001 Put me down for a pair. Now to go salvage shopping. Quote Link to comment Share on other sites More sharing options...
Z-Dreamer Posted July 18, 2001 Share Posted July 18, 2001 Hey Scottie, I want a set to go with the R200 I picked up resently. I believe it's a 3.36 rearend. Let me know when you want the money, ok? Thanks Mark Quote Link to comment Share on other sites More sharing options...
tsumner Posted July 19, 2001 Share Posted July 19, 2001 Scotty put my name on the list for a set. Tom Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted July 24, 2001 Share Posted July 24, 2001 We are close to having the minimum 10. Here is a list of the folks who have expressed interest, to date: Floydd Grissom 78TurboZ Pete KraZ4spd Evan Mike Kelly Z-dreamer Tsumner Vinh Vu Quote Link to comment Share on other sites More sharing options...
clint78z Posted July 24, 2001 Share Posted July 24, 2001 I can't miss out again, silly me I was going to save some $$. Put me down for a set. Quality and good price gotta love it Quote Link to comment Share on other sites More sharing options...
pparaska Posted July 24, 2001 Share Posted July 24, 2001 Scottie, if you get to 11 sets, let me know as my current engine troubles are making money tight and I'd want to back out. But if you need my set to get 10, I'm not going to hold things up for everyone and just keep my order in there in that case. Quote Link to comment Share on other sites More sharing options...
Scottie-GNZ Posted July 24, 2001 Share Posted July 24, 2001 Pete, will do and I know about budget monies getting tight. Mine is not so much tight as my goals keep changing and speed cost money. My Z started out as a 250+hp L28T that was going to see light road racing and autoX duties . I get a grin everytime I see a post here that says they are just looking for about 250-275hp. Uhhh, yea, RIGHT! Quote Link to comment Share on other sites More sharing options...
Mikelly Posted July 25, 2001 Share Posted July 25, 2001 Scottie, Pull me off the list... I'm gonna try the bolt on route... Mike Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted July 28, 2001 Share Posted July 28, 2001 Scottie, Don't forget that I'm asking for two pair. So my interest counts for 2. By the way, will these CV adapted shafts clear my 280ZX brakes? I would hate to have reconvert them. Evan [ July 28, 2001: Message edited by: Evan ] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.