TrumpetRhapsody Posted June 6, 2008 Share Posted June 6, 2008 I bought a NRG short hub from a member here, and it ended up being the wrong size. Pretty sure it's a mis-fit when the threads won't even pass through the hole in the hub. So now I'm trying to figure out what it fits to, and what I need to get. Are the S30 steering shafts the same as on a 240sx? There is a MUCH larger selection for S13/S14's. I can't afford the MOMO etc branded ones (only threads I've seen on this topic refer to them). I don't know how to go about finding what car the one I have fits and trying to sell it. The hole appears to be apprx. 16mm in diameter to the outside of the splines. Quote Link to comment Share on other sites More sharing options...
TrumpetRhapsody Posted June 8, 2008 Author Share Posted June 8, 2008 *bump* I bought a 240sx quick release hub for $16 on ebay, so we'll see if that works. Quote Link to comment Share on other sites More sharing options...
TrumpetRhapsody Posted June 21, 2008 Author Share Posted June 21, 2008 Just for everyone's information, 240SX HUBS DO NOT FIT OUR CARS. Would've been nice to know, $16 down the drain, oh well. Quote Link to comment Share on other sites More sharing options...
Nismo280zEd Posted June 21, 2008 Share Posted June 21, 2008 well now we know! Do you have a picture? Might help. Quote Link to comment Share on other sites More sharing options...
TrumpetRhapsody Posted June 21, 2008 Author Share Posted June 21, 2008 My room mate informed me that the 240sx hub I ordered was the same size as the NRG hub pictured in the first post. I can post a pic of the new hub in a few days. At least now I know what the NRG hub is, so I can sell it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.