m4xwellmurd3r Posted July 12, 2008 Share Posted July 12, 2008 I really like my stock rims, and decided that one day, I'll find a nice set of these and have them professionally widened. something like 1 inch inside and out on the fronts to bring them to 8inches, and 2 inches outside, 1 inch inside on the rear, bringing them to 9 inches. It can be done, but it's quite costly. Basically it would cost as much as it would to get a pretty nice set of rims. I was curious to see what they would look like if they were wider so I did a crappy photoshop to a picture I had. they look really nice actually. but of course, this wouldn't happen for quite a long time haha. not till it has a good running engine, coil over's, and money for new tires and the widening job. stock widened too bad it would probably cost anywhere from 300+ per rim. Quote Link to comment Share on other sites More sharing options...
lazycat5 Posted July 13, 2008 Share Posted July 13, 2008 Check out Wheel Works custom made wheels. I'm thinking of widening my snowflakes two inches for the rears and narrowing my fronts. Only thing is that I think they can just widen them from the back and set your offset from the hub(welding on a spacer). 800 buks for all four. Call Tim Smith (609)387-4488 he's here in Jersey. Quote Link to comment Share on other sites More sharing options...
rturbo 930 Posted July 13, 2008 Share Posted July 13, 2008 Check out Wheel Works custom made wheels. I'm thinking of widening my snowflakes two inches for the rears and narrowing my fronts. Only thing is that I think they can just widen them from the back and set your offset from the hub(welding on a spacer). 800 buks for all four. Call Tim Smith (609)387-4488 he's here in Jersey.OT: Where in NJ are you? I'm by Mt. Holly/Moorestown. PM me if need be. Quote Link to comment Share on other sites More sharing options...
m4xwellmurd3r Posted July 13, 2008 Author Share Posted July 13, 2008 Check out Wheel Works custom made wheels. I'm thinking of widening my snowflakes two inches for the rears and narrowing my fronts. Only thing is that I think they can just widen them from the back and set your offset from the hub(welding on a spacer). 800 buks for all four. Call Tim Smith (609)387-4488 he's here in Jersey. there's a company in michigan that will do the outside of aluminium rims, but it costs a little more to finish the welds smooth. the place is called Weldcraft Wheels http://www.weldcraftwheels.com/ from the looks of their pictures, they do a really nice job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.