Zmanco Posted July 31, 2008 Share Posted July 31, 2008 http://cgi.ebay.com/ebaymotors/Datsun-240Z-260Z-280Z-4-PISTON-CALIPER-BRACKETS-NR_W0QQcmdZViewItemQQcategoryZ33564QQihZ021QQitemZ310070696273QQrdZ1QQsspagenameZWDVW I'm guessing this goes between the caliper and strut and would allow the rotor to be mounted directly to the hub instead of requiring a spacer. But it doesn't look thick enough given the hub spacer is usually 0.5". And notice the packaging - it looks like a genuine Nissan part. Anyone know anything about this? Quote Link to comment Share on other sites More sharing options...
Xnke Posted July 31, 2008 Share Posted July 31, 2008 This looks like a caliper spacer to fit between the two halves, widening them up enough to allow the thicker vented rotors. Quote Link to comment Share on other sites More sharing options...
zcarnut Posted July 31, 2008 Share Posted July 31, 2008 This looks like a caliper spacer to fit between the two halves, widening them up enough to allow the thicker vented rotors. That’s what it looks like, but there is no hole for the fluid crossover! Quote Link to comment Share on other sites More sharing options...
Eddie289 Posted July 19, 2011 Share Posted July 19, 2011 That’s what it looks like, but there is no hole for the fluid crossover! Hi Fella's, does anyone know what these brackets are for? I have a set which I got when I bought some other stuff as well for a rear disc upgrade for my 240Z. Cheers Eddie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.