danc Posted March 8, 2002 Share Posted March 8, 2002 Guys: I've read several posts, but am still confused. I have a non-turbo 83 and have a line on 82 2 Turbo half shafts/CVs with the companion flanges, but without hub flanges/stub axles (car is already scrapped). Will the CVs fit my 83 using my stub axles with the turbo companion flange??? Thanx Dan Quote Link to comment Share on other sites More sharing options...
blueovalz Posted March 8, 2002 Share Posted March 8, 2002 I can't offer a difinitive answer on that, but I can't imagine Nissan not standardizing the stub axles between the two so that the companion flanges fit both. The only way to give you a better idea if it will work is to remove the companion flanges on your 83, and count the splines. You will need 25 splines (on the stub itself) to allow the swap to work. Quote Link to comment Share on other sites More sharing options...
Guest JAMIE T Posted March 8, 2002 Share Posted March 8, 2002 They should work fine. I have a parts car '83 NON-turbo car that came from the factory with R200 and CV shafts. It is a 2+2 model. Be careful though, I have seen some ZX's with R180's and CV shafts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.