Phantom Posted October 28, 2008 Share Posted October 28, 2008 My 1993 300ZX has finally started having a few issues at 126k miles. One of my fuel injectors has died so I'm going to go in and do them all while it's all apart. While I'm at it I'd like to do something about the cracked connector boots. Does someone know a source for replacement boots or a way to reapir them. My local Nissan dealer only sells a full engine harness - no separate boots. I also didn't see anything on the Motorsport Auto site. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
evildky Posted October 31, 2008 Share Posted October 31, 2008 the z32 fuel injector pigtails are just a little different form standard bosch connectors, you can buy bosch connectors cheap from summit but the alignment pin won't allow you to use them, I replaced the connectors on my z32 with a set I bought on ebay, there are people who sell new nissan replacment connectors for sheap on ebay Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted October 31, 2008 Share Posted October 31, 2008 the z32 fuel injector pigtails are just a little different form standard bosch connectors, you can buy bosch connectors cheap from summit but the alignment pin won't allow you to use them, I replaced the connectors on my z32 with a set I bought on ebay, there are people who sell new nissan replacment connectors for sheap on ebay I have six of those new oem pigtails for the Z32 injs. I bought them back when I was gathering up all the needed stuff for my standalone swap, and made a mistake buying these. They didn't fit on my non Z32 inj's. I paid close to $30 apiece, but will give you a sweet deal if you want to use oem replacement pigtails... LMK... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.