Mikelly Posted June 15, 2002 Share Posted June 15, 2002 OK, so now I have in house a set of R230 Axles, TWO R230 diffs with axle flanges, a re-drilled Mustache Bar, a Modified Driveshaft that allows you to use an R200 Input Flange on the R230 then converts to the JTR driveshaft I have... All I need now is another set of Complete CVs and to make a front mount... Just contacted Dave about an aluminum brace... Anything else I might have missed??? Mike Quote Link to comment Share on other sites More sharing options...
Tim240z Posted June 15, 2002 Share Posted June 15, 2002 An adapter for the cv flange to the companion flange at the stub axle. Tim Quote Link to comment Share on other sites More sharing options...
Tim240z Posted June 15, 2002 Share Posted June 15, 2002 Nope. Same idea though. Tim Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted June 16, 2002 Share Posted June 16, 2002 Add patientence and high hopes and GOOD LUCK! Quote Link to comment Share on other sites More sharing options...
silicone boy Posted June 16, 2002 Share Posted June 16, 2002 Is that the same one that Ross makes for the 280zxt halfshaft swap? Quote Link to comment Share on other sites More sharing options...
Mikelly Posted June 17, 2002 Author Share Posted June 17, 2002 I already have the Ross/ Scottie CV adapter for the companion flange on the stub axle, and I do have a set of aluminum adapters for going from the Diff Flange, but that unit bolts to regular axle shafts. I think this unit is just wide enough that you have to shorten the axles... Mike Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted June 18, 2002 Share Posted June 18, 2002 Mike, If thats the stiff that Tdab got from me, those adaptors are steel and adapt the stock u-joint half shaft to the R-230 out put flange. He also got a set of shortened half shafts (the U-joint kind) but I would not reccomend using those. I snapped U-joints like crazy with that set up. Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.