Mike Rowe Posted March 4, 2009 Share Posted March 4, 2009 I need new hoses to the vapour tank, but they are either not available or outrageously expensive. What have others done? Can you do without the vapour tank? If so what did you do with the outlets on the fuel tank itself? Otherwise have you found hoses to fit the vapour tank? Is the vapour tank pressurised with the RB system in? Quote Link to comment Share on other sites More sharing options...
X64v Posted March 4, 2009 Share Posted March 4, 2009 I used Earls Super Stock rubber hose (also called Push Lock). Flexible enough and available in sizes large enough to fit. Quote Link to comment Share on other sites More sharing options...
Mike Rowe Posted March 4, 2009 Author Share Posted March 4, 2009 Thanks. For the fuel tank filler hose presumably you used stock there? regards Quote Link to comment Share on other sites More sharing options...
X64v Posted March 4, 2009 Share Posted March 4, 2009 Didn't have to change it, mine's still in good shape. Quote Link to comment Share on other sites More sharing options...
Bishopsrock Posted March 29, 2009 Share Posted March 29, 2009 I plugged all of the hose holes in the main fuel tank leading to the vapour tank. Then I fitted a UK fuel tank filler pipe breather - all it does is route a single feed from the filler neck through the wheel well out to ground. If I overfill it now then excess fuel will start to dribble out at my feet. No problems so far with this setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.