Horatio Posted March 5, 2009 Share Posted March 5, 2009 Anyone know what banjo diameter (10 or 11mm) to use for the maxima rear disc swap? (85 maxima rear calipers)... Also need to know what size (diameter and thread) for the banjo bolt. You can order just about any length you want from classic tube (D.O.T. approved) http://www.classictube.com/brdhoses.asp Thanks Quote Link to comment Share on other sites More sharing options...
zcarnut Posted March 5, 2009 Share Posted March 5, 2009 Since the threads on the Maxima (and all other Nissan) calipers is 10mm x 1.0mm you must use a 10mm banjo bolt and therefore a banjo hose end with a 10mm hole. I used Earl’s Performance Products when I assembled my stainless steel flex lines with a banjo fitting at one end: You can download the Earl’s catalogs at http://www.earls.co.uk/ Quote Link to comment Share on other sites More sharing options...
Horatio Posted March 6, 2009 Author Share Posted March 6, 2009 Since the threads on the Maxima (and all other Nissan) calipers is 10mm x 1.0mm you must use a 10mm banjo bolt and therefore a banjo hose end with a 10mm hole. I used Earl’s Performance Products when I assembled my stainless steel flex lines with a banjo fitting at one end: You can download the Earl’s catalogs at http://www.earls.co.uk/ Just what I was looking for! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.