Jump to content
HybridZ

NEW drag times with my Q45 diff !


Recommended Posts

FINALLY got it back to the drag strip after the Q45 was put in... My previous best time was a 8.36@90.87 in the 1/8th.

 

Went from a open diff R200 3.91 gears to the Q45 w/ 3.54 gears.

 

NEW TIME 8.04@92.54 !!!! on STREET TIRES, that's OVER 3/10ths faster...

 

WOOT :mrgreen:

 

My 3 progressive runs were a 8.28, 8.15, then the 8.04

 

The 8.04 was done by dropping the clutch around 2,200 rpms or so. Even at that RPM the car bogged a little and spun/wheel hopped 2nd gear BAD, I mean BAD :shock: If 2nd would have hooked I would have been in the 7s !

 

Tires I run on are the Toyo Proxes T1R 245/45/16

 

Here's my NEW favorite picture :mrgreen:

8_04.jpg

Link to comment
Share on other sites

it will run 7's if you can get them 60's down to the 1.7 or quicker. Try launching at 3500 to 4000 rpms if your clutch will handle it.

 

Also you might want to look at some Nitto DR.

 

You have got some good MPH but you need more traction just like everyone else does.

Link to comment
Share on other sites

Yeah, I was suprised my 60 ft times were still in the 2s even after dropping it at 2,200 RPMs.... I was going to try for 7s one more time after my 3rd run, but was a little afraid of something going wrong or breaking at that point, so I just went home.

 

I'm going to buy me some full slicks here soon...

 

MT drag slicks 26x8.5x15 will do just fine ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...