Zed lover Posted April 29, 2009 Share Posted April 29, 2009 Does any one know where i can get one stock piston.....i looked at this one http://www.thezstore.com/page/TZS/CTGY/PEM03 from the z store but i don't think it will work with my stock pistons. I dont know what to do. Quote Link to comment Share on other sites More sharing options...
blue72 Posted April 29, 2009 Share Posted April 29, 2009 One stock piston for what? Quote Link to comment Share on other sites More sharing options...
Zed lover Posted April 29, 2009 Author Share Posted April 29, 2009 A stock L28 Quote Link to comment Share on other sites More sharing options...
Warren Posted April 29, 2009 Share Posted April 29, 2009 I have a whole set, brand new, 86mm (stock) with wrist pins and rings, for an L28 that I'll sell you... $150 plus shipping. Quote Link to comment Share on other sites More sharing options...
Zed lover Posted April 29, 2009 Author Share Posted April 29, 2009 That's a great deal...I'm trying to avoid having to buy a whole set...i got laid off last week and have no money but thank you for the offer. I might take you up on that if i can get some cash in the next couple of weeks. Quote Link to comment Share on other sites More sharing options...
Warren Posted April 29, 2009 Share Posted April 29, 2009 They're Repco 86mm Cast pistons (not hypereutectic coated or anything) with new rings & pins for an N/A engine. No problem with the wait, hell, they've been sitting on the shelf in the box now for over 4 years. Still brand new, nice and dry and shiny...just like the day they were boxed up. Quote Link to comment Share on other sites More sharing options...
Zed lover Posted April 29, 2009 Author Share Posted April 29, 2009 Awesome i will defiantly work on getting some cash....Thanks!! Quote Link to comment Share on other sites More sharing options...
junglist Posted April 30, 2009 Share Posted April 30, 2009 I have dished pistons in stock bore and I have flat tops .020" over. Would either of those be what you are looking for? Quote Link to comment Share on other sites More sharing options...
Zed lover Posted April 30, 2009 Author Share Posted April 30, 2009 I'm not really Sure. I dont kno much about this stuff im learning as i go. I was rebuilding my stock l28 and while i was putting the pistons back in i noticed that one was cracked. I was trying to see if i could find one piston but if i have to buy a set...i have to buy a set.....but i will try to do some research and see if any of those will work. thanks Quote Link to comment Share on other sites More sharing options...
csorgenf Posted May 1, 2009 Share Posted May 1, 2009 I have a set of dished pistons stamped p90 from a 75, some cracked when my son removed the pins so I can send you one for the cost of shipping. Quote Link to comment Share on other sites More sharing options...
Zed lover Posted May 2, 2009 Author Share Posted May 2, 2009 will that work with an l28 Quote Link to comment Share on other sites More sharing options...
Xnke Posted May 2, 2009 Share Posted May 2, 2009 we need to know if you have dished pistons or flat top pistons. Look at the pistons you have, and see if they have a flat top, or a dish cut in the top. All stock L28 pistons will interchange, but come in three flavors: N42 block: 10cc dish, standard thickness rings F54 block, N/A motor: flat top pistons, standard thickness rings F54 block, turbo motor: 10cc dish, 1mm thickness rings. (as per How To Modify...no turbo pistons here to measure ring thickness ATM...) Quote Link to comment Share on other sites More sharing options...
Zed lover Posted May 2, 2009 Author Share Posted May 2, 2009 awsome thank you for the help they are dished so the pistons that csorgenf has should work right? what are the shipping prices do you kno Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.