emeraldlion Posted May 7, 2009 Share Posted May 7, 2009 Ok, now I find it odd. I tried every phrase in the book to search on how to remove the seats from the rails. I have some cheap corbeau seats in my z and I think they're using the stock rails. How do you take them off? I came up with nothing in the search. Quote Link to comment Share on other sites More sharing options...
Challenger Posted May 7, 2009 Share Posted May 7, 2009 There should be 4 bolts.... Quote Link to comment Share on other sites More sharing options...
emeraldlion Posted May 7, 2009 Author Share Posted May 7, 2009 Okay. Lol, I was looking for a hidden spring or clip that held the top slider to the lower slider to slide it all the way forward and off. The easiest answer is usually the correct answer no? Quote Link to comment Share on other sites More sharing options...
AK-Z Posted May 7, 2009 Share Posted May 7, 2009 There should be 4 bolts.... both sets of mine were big screws Quote Link to comment Share on other sites More sharing options...
hogie Posted May 7, 2009 Share Posted May 7, 2009 As far as I can tell you can't take off your sliders until you unbolt them from the floor brackets. Then there are two bolts on each side holding them to the seat frame. Quote Link to comment Share on other sites More sharing options...
Challenger Posted May 7, 2009 Share Posted May 7, 2009 both sets of mine were big screws Ah yes, you are correct. They are "screws" with round phillips heads. Quote Link to comment Share on other sites More sharing options...
catalak Posted March 9, 2012 Share Posted March 9, 2012 Ah yes, you are correct. They are "screws" with round phillips heads. sorry to ask, but i was wondering if anyone could provide pix... for a newb? Thanks! Quote Link to comment Share on other sites More sharing options...
emeraldlion Posted March 10, 2012 Author Share Posted March 10, 2012 There are 4 bolts that bolt the seat frame to the support rail in the floor board. Just unbolt those and take the whole seat/frame out. I think they were just saying that their cars had a po replace the bolts with large screws. Quote Link to comment Share on other sites More sharing options...
catalak Posted March 19, 2012 Share Posted March 19, 2012 There are 4 bolts that bolt the seat frame to the support rail in the floor board. Just unbolt those and take the whole seat/frame out. I think they were just saying that their cars had a po replace the bolts with large screws. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.