DuoWing Posted May 13, 2009 Share Posted May 13, 2009 I need the driver side taillight harness from a 76' 280Z. Or any other year if it's the same. All I really need is the socket for the bulb for the brake light on the driver's side, but if I can get un-cut harness that would be better. I'm looking for the section from the bulb sockets up to that little plastic connector where it plugs into the harness. The one that's in my car was cut up for a connector for a trailer... It's not that bad except for the fact that for some reason one of the sockets for the bulb itself is missing. So if anyone has this, let me know. Does anyone know if the sockets from the 280ZX taillights will fit in the 280Z taillights? If that would work I could probably go cut it off my car. PM or Respond e-mail: duowing@gmail.com Thanks guys! Link to comment Share on other sites More sharing options...
Rustyfriend Posted May 16, 2009 Share Posted May 16, 2009 I have a '78 280z parts car i can get that from. Any chance you can show a picture of how much of the harness you need? If not, i'll just cut it way back and send you more than you need. Make an offer. Link to comment Share on other sites More sharing options...
menzzer37 Posted May 16, 2009 Share Posted May 16, 2009 I've got a 76 tail assembly. Does your have the harness running through the body or across the floor? Link to comment Share on other sites More sharing options...
DuoWing Posted May 18, 2009 Author Share Posted May 18, 2009 I managed to get a hold of the section I needed. Thanks though! Link to comment Share on other sites More sharing options...
Recommended Posts