Zmanco Posted July 30, 2009 Share Posted July 30, 2009 I need to decide on a BOV for my turbo build: L28 with T3/T04E. I'm leaning towards this one: http://www.siliconeintakes.com/product_info.php?cPath=11&products_id=488&osCsid=cb98cae5277702c33d39b9630c062240 I've seen this BOV mentioned in a few threads as being good quality and value. But even siliconintakes says this is difficult to adjust. For those of you who have used it, did you have to change the spring, or were you able to use it as-is? My goals are modest for boost - probably no more than 15 psi. Is this BOV overkill? Should I be looking at a different one? Quote Link to comment Share on other sites More sharing options...
Zmanco Posted July 31, 2009 Author Share Posted July 31, 2009 Bump. Anyone? Quote Link to comment Share on other sites More sharing options...
big-phil Posted July 31, 2009 Share Posted July 31, 2009 not sure but I bought allot of my stuff from them and its all good quality Quote Link to comment Share on other sites More sharing options...
niner11 Posted August 1, 2009 Share Posted August 1, 2009 Mine looks similar but it came from http://www.ssautochrome.com I have used the stock spring with no issues but read other places that you should pick the correct spring by your measured vacuum at idle. I remember buying one pretty cheap from another website but I haven't bothered to install it yet. Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted August 1, 2009 Share Posted August 1, 2009 I have the exact one. Just so you know you can e-mail them and request an aluminum flange for it. Gabe (wigneout) has it also and neither one of us have had to change the springs. I love mine. It works great. Up until about 14 psi its a whoosh but above that its a nice crack sound that i love. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.