S130Z Posted September 20, 2009 Share Posted September 20, 2009 After about 2 years of research, It's finally time for me to initiate Project: HCITMHLTDT? (Holly Crap It Took Me How Long To Do This?). I am swapping to a L28eT in about a week and a half and I need a base map to work off of. I recently received my MSII PCB 3.57 in the mail. Since this is my DD from work to home, I need some guidance and don't have as much time as I would like to make my own tune from scratch. (I did run through the stickies to find a map that is close to my setup, but I was unsuccessfull in the hunt.) Here is my setup: L28ET rebuilt with stock internals. Rebuilt head with minor port work. AZC 440cc injectors paird with Pallnet fuel rail and Aeromotive FPR GT30 replica, T3/T04 hybrid SlowBoy Racing tubo. Bell Engineering Front mount intercooler 3" exhaust from turbo on back Greddy Type R BOV Turbonetics Evo wastegate N42 intake ported to fit 60mm TB Stock Turbo Dizzy LC1 wideband MSII PCB 3.57 I will be running off the wastegate spring at 7psi to start with and slowly work my way up to around 16 psi. Any maps are helpfull!! Also, I am at sea level if that makes a difference to some of you high altitude guys. Thanks, Adam Silver Quote Link to comment Share on other sites More sharing options...
CamH Posted September 20, 2009 Share Posted September 20, 2009 Here is my tune. A lot of it will be pretty far off but it should get you going if you adjust the injector settings and get the trigger angle right for your set up. Here's what I'm running fyi: L28ET with 8:1 compression Factory 280ZXT T3 @ 8PSI Factory L28ET injectors Factory L28ET distributor 300ZX coil MSA Downpipe to 3" exhaust No intercooler LC1 Wideband MegaSquirt II v3.57 camh.msq.zip Quote Link to comment Share on other sites More sharing options...
S130Z Posted September 20, 2009 Author Share Posted September 20, 2009 Just curious, how long have you been running this tune? Quote Link to comment Share on other sites More sharing options...
CamH Posted September 20, 2009 Share Posted September 20, 2009 Just curious, how long have you been running this tune? The basic tune, I have been running since may, with just small amounts of tinkering. Quote Link to comment Share on other sites More sharing options...
S130Z Posted October 2, 2009 Author Share Posted October 2, 2009 Quick question for you CamH, did you build this tune on BG 2.886? Quote Link to comment Share on other sites More sharing options...
CamH Posted October 2, 2009 Share Posted October 2, 2009 Quick question for you CamH, did you build this tune on BG 2.886? That sounds correct, but I did update to 2.889 and was able to use the exact same tune. Quote Link to comment Share on other sites More sharing options...
Z31Guy Posted October 21, 2009 Share Posted October 21, 2009 hey, just wondering if this map will work for my Z: 87' 300zx Turbo stage 3 clutch/12lbs flywheel 3" intake/exhaust 2.5" piping/24x3x13" intercooler T-3 8lbs Boost wideband O2 255 walbro/420cc injecters bout to add some major cams i really just want a map for the MS-II that will correct the timing and fuel for the larger injectors and pump, i will have it tuned after the cams/head work/overbore/stroke out/T-4 upgrade, but i would like to be able to have fun with it in the mean time... work on a budget you know! lol Thanks for playing! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.