NZeder Posted November 12, 2009 Share Posted November 12, 2009 The Guys from Spool Imports in Australia that supply rods and cranks for different engines are working on a 95mm stroker crank for the RB30 blocks. So at 86.5mm more and 95mm stroke that is 3.4l of RB engine. Plans are to have this as a kit in 2010. See here for some info http://www.skylinesaustralia.com/forums/Crank-Strength-Upgrading-t212607.html&st=175 Quote Link to comment Share on other sites More sharing options...
MAG58 Posted November 12, 2009 Share Posted November 12, 2009 That's one big ol' honkin' stroke. So what's the rod length going to be and compression height? I feel this may kill the rev-happy nature of the RB that many have come to enjoy (why I decided to go back to the shorter stroke on my M104), but it may open a whole new facet of RB power. Quote Link to comment Share on other sites More sharing options...
Zreddy Posted November 19, 2009 Share Posted November 19, 2009 omg.... rb34dett!!!! o/ Quote Link to comment Share on other sites More sharing options...
RIPSNZ Posted November 24, 2009 Share Posted November 24, 2009 I'll be very interested to see if they can actually make it fit, I did a RB33 stroker for a very good reason. Time will tell and I wish them the best of luck. Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.