Guest redZX-runner Posted November 21, 2009 Share Posted November 21, 2009 I have had two release bearings implode on my with minimual driving. I do not see a problem. Anyone have this issue? Quote Link to comment Share on other sites More sharing options...
roger.svoboda Posted November 21, 2009 Share Posted November 21, 2009 riding the clutch, improperly installed, wrong bearing, two faulty in a row is a low probability. Quote Link to comment Share on other sites More sharing options...
frank280zx Posted November 22, 2009 Share Posted November 22, 2009 ask it in the stock drivetrain sextion you might get more replies than in the s130 section.. the engine is generic to the s30's But as for the problem... ^^what he said^^^ Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted November 23, 2009 Share Posted November 23, 2009 Very likely that you have the wrong throw out collar on. Might be long and its making the bearing ride the clutch all the time. Quote Link to comment Share on other sites More sharing options...
Guest Rolling Parts Posted November 24, 2009 Share Posted November 24, 2009 They should last a long, long time. It's time to stop replacing and start inspecting all the other parts involved. Look for any damage in the collar itself and for damage on the pressure plate. Also check for free movement of the assembly once it's snapped back together and before reinstalling the transmission to make sure the release arm is not binding or sticky. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.