Jump to content
HybridZ

L28et with t3/t4 Turbo wastegate


J240ZTurbo

Recommended Posts

The actuator might, but the bracket won't. I just went through this with my Garrett T3/T4 which looked a lot like Juan's. The issue is that the lever for the wastegate is so close to the bottom of the intake manifold that the WG actuator cannot be mounted on top to line up with the lever.

 

In the end I used this one:

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-WGT-019&Category_Code=WGT

 

You'll need one that has the bent arm. I also had to bend the end piece that slips over the WG lever, but it broke off (hardened?) so I fabbed a piece of aluminum in place of it. I don't think the soft Al will last long, but after several thousand miles it's holding up so far.

P1020321_1_thumb.jpg

P1020322_1_thumb.jpg

P1020323_1_thumb.jpg

P1020324_1_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...