jacob80 Posted January 30, 2010 Share Posted January 30, 2010 Hey guys, Right now, we're running a Dynomax Turbo 2 muffler (muffler that comes with the MSA kit). We used to be NA with it, which was pretty loud, but now that we've gone turbo, it is almost silent So as of now, I'm looking at a straight through muffler that will be about midway between loud and quiet because we have a cut out installed. My question is, what is the biggest diameter tip that will fit through the exhaust pipe cut out in the rear lower bumper? I'm thinking something along the lines of an HKS Hi-Power or a Greddy TiC. Thanks guys! Quote Link to comment Share on other sites More sharing options...
nosebleedZ Posted January 30, 2010 Share Posted January 30, 2010 Did you ever get your MS problem fixed? I followed that one for a while & just wanted to know. Anyhoo, With a small body saw & some $3 door edge molding to cover the bare metal, you can make tips from 2.5"-4" work quickly. I dont keep up with brand names, but I have duals from 2.5" exhaust pipes to twin 3" x 2.75" ovals. Quote Link to comment Share on other sites More sharing options...
jacob80 Posted January 30, 2010 Author Share Posted January 30, 2010 Well, I'm thinking its a VB921 issue. If you go read my thread, you'll see. Anyways, I do not want to make any body modifications whatsoever, just fit the tip through the cut-out in the rear lower body piece below the taillights. Quote Link to comment Share on other sites More sharing options...
nosebleedZ Posted January 30, 2010 Share Posted January 30, 2010 Z or ZX body? Quote Link to comment Share on other sites More sharing options...
jacob80 Posted January 30, 2010 Author Share Posted January 30, 2010 1973 240Z, sorry about that. I didn't know the ZX had a slot for the muffler tip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.