beebeecivic Posted January 31, 2010 Share Posted January 31, 2010 I have been searching and searching for a pic of the "notch" on the cam pulley required to set the timing. I have looked at the fsm and haynes manual but I need a actual picture of what it looks like. Any help would be nice thanks! -bee Quote Link to comment Share on other sites More sharing options...
rjstcroix Posted February 9, 2010 Share Posted February 9, 2010 (edited) Hey, This might help. Its difficult to see on your own car sometimes. By running your hand over the balancer (car off) might be able to locate it by feel. If you're trying to check timing I'd suggest wire brushing the mark indicator and the timing notch then highlight both with some chaulk. Hope this helps. http://atlanticz.ca/zclub/techtips/timing/timinmark/index.htm Enjoy! RSC Oops...just read "Cam pulley" can't help with a pic on that one. Sorry. Edited February 9, 2010 by rjstcroix Re: read original post about "Cam pulley". Quote Link to comment Share on other sites More sharing options...
FlatBlack Posted February 9, 2010 Share Posted February 9, 2010 If you have the front cover off, just count the 42 links from the crank gear to the cam gear. Quote Link to comment Share on other sites More sharing options...
Swervey McZCar Posted February 26, 2010 Share Posted February 26, 2010 (edited) This thread is a little old, but in case you are talking about CAM Timing... Edited February 26, 2010 by Swervey McZCar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.