Jonas240z Posted September 15, 2010 Share Posted September 15, 2010 (edited) I purchaced a set of sway bars from MSA. It comes with instruction and all but i really don't see how the rear sway bar will be mounted. Does anyone here have a picture of it mounted already? I also have 300zx CV's and R200, i don't know if it makes a differance? Thanks Edited September 15, 2010 by Jonas240z Quote Link to comment Share on other sites More sharing options...
JMortensen Posted September 15, 2010 Share Posted September 15, 2010 (edited) I purchaced a set of sway bars from MSA. It comes with instruction and all but i really don't see how the rear sway bar will be mounted. Does anyone here have a picture of it mounted already? I also have 300zx CV's and R200, i don't know if it makes a differance? Thanks I ran one with the R200, but not with CV's. No pictures, but basically you have to drill holes on either side of the frame rail in the back and then install the brackets through the floor. Don't overtighten the bolts because you can crush the frame rail. On my lowered car I had issues with the bar hitting the frame and the end link lengths as well. I would suggest if you're not married to that one you check out the Suspension Techniques rear bar. It really is a better design IMO and it's much easier to get at the driveshaft bolts with the ST bar. Edited September 15, 2010 by JMortensen Quote Link to comment Share on other sites More sharing options...
Jonas240z Posted September 15, 2010 Author Share Posted September 15, 2010 Thanks for the info, i really wish someone has a picture available. I also have an old swaybar that goes behind the diff cover. The only thing is that the bushings are crap now. I don't know what brand or kind that bar is, so i don't know where to get those bushings. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted September 17, 2010 Share Posted September 17, 2010 (edited) Thanks for the info, i really wish someone has a picture available. I also have an old swaybar that goes behind the diff cover. The only thing is that the bushings are crap now. I don't know what brand or kind that bar is, so i don't know where to get those bushings. Thanks for the help. Where in OC are you? You can come look at my bar... I don't think mine is an MSA bar... I bought mine from TMC... Now is a good opportunity to use my snazzy ramps that I built to get the back end of the car up without jacks Edited September 17, 2010 by 240Z_Master Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.