oscar Posted December 4, 2010 Share Posted December 4, 2010 I am working on a rear disc brake conversion. I have the maxima brackets,but I want to use the vented 300zx rotors. I would also like to have a 2 piston rear caliper. I have been reading all the articles,i am a bit confused,any suggestions? Quote Link to comment Share on other sites More sharing options...
michaelp Posted December 5, 2010 Share Posted December 5, 2010 The only 300ZXs that had vented rear disc were 5 lug, which makes it that much more difficult. You may be able to have the rotors re-drilled, but I don't see it being worth it. Plus, single piston should be plenty adequate for the rear of a S30, but if you want it you'll probably have to figure it out on your own. Look into getting custom brackets made? I don't think this is the right section for your question... Quote Link to comment Share on other sites More sharing options...
ModernS30 Posted December 9, 2010 Share Posted December 9, 2010 With 79-x? Brackets, the ones that put the caliper 90* from the strut tower, you can bolt on Z32 TT calipers, with 85 solid rotors. This will create major wheel clearance issues spoke wise, weels spacers will be required. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.