lgoodson@pacbell.net Posted March 11, 2011 Share Posted March 11, 2011 (edited) So I bought i set of pistons from a guy in Chicago. He said they were for a 240Z but they have dished tops and my pistons are flat. He sent a set of rings made by Beck/Arnley #0133863 which when I go to that web site it tells me that theses rings are for a 260Z. Are these rods and pistons interchangable? They look the same except for the dishing. What about compression differences? And can anyone tell me in what order the rings go on. There is only a red paint mark at the tip on one set which has a polished edge and a green paint mark on the other set with no polished edge. Which is the top one and which is the middle one? Help me out someone. I don't want to put the engine back together the wrong way Thanks Larry Edited March 11, 2011 by lgoodson@pacbell.net Quote Link to comment Share on other sites More sharing options...
s30red240z Posted March 11, 2011 Share Posted March 11, 2011 the rings i think is the same bore, but rods are different between 240z vs 260z Quote Link to comment Share on other sites More sharing options...
lgoodson@pacbell.net Posted March 11, 2011 Author Share Posted March 11, 2011 What is different about the rods? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.