Jump to content
HybridZ
Sign in to follow this  
seattlejester

Transmission Tunnel Measurement for 240z

Recommended Posts

Hey guys,

 

Kind of a random request. Does someone with a 1971 or 1972 240Z have easy access to measure the length from the firewall to the bolt holes of the stock cross member? Just in a forward to aft measurement like straight from the trans crossmember bolt hole to the firewall if say you put a piece of wood or something that spans the tunnel gap. 

 

It should be between 16 inches to 23 inches. I'm thinking it is almost in the middle of that at 19.5 inches.

Share this post


Link to post
Share on other sites

It would have been so easy to grab it before I cut the tunnel out...I was just so tired though that it slipped my mind. 

 

I think that won't work as I trimmed the panel quite a bit so I doubt the pieces will fit. I really need to just crawl under the car and find out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×