73BOTIZ
-
Posts
68 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by 73BOTIZ
-
Al, I have a pair of stock "u-joint" shafts if you can use them. Mike in San Leandro
-
Curtis, I am running dual 2-1/2" exhaust into 2 flow-tech mufflers, 2-1/2" in/out.I welded the mufflers together side by side and mounted them in the stock location. It is tight but they do fit. I can e-mail a short video clip if you want to hear what it sounds like. Mike
-
I removed the JTR bracket and installed hood pins where the rubber stops were.I am not sorry I did it. I once had a hood release cable break on a 62 vette and i didn't think i was ever going to get my hood open.Do you just need a lens or the whole assy? I think i have an extra assy.if your interested. Mike Dennis
-
Dave, I have an 86 T-5 with the camaro bell housing and the slave cylinder mod that JTR recomends. It fits perfect. If you use a straight up bell housing, you will have to make up something to adapt the camaro T-5 to the mount because the tilt of the trans is not on the same plane as trans mount pad. Mike Dennis
-
I just finished my cv halfshaft upgrade. I made aluminum 'spud' and used a press to install my r200 seals. It was a tight fit but they did go in.
