-
Posts
465 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by MY77Z
-
-
Holly $hit, the engine bay looks even better
-
i'm in love
that is what you get when you mix up 2 great cars, you end up with a sexy, awesome, amazing, astonishing (excuse my english) car,
congrats and any vids yet ??
-
ok, let me get it guys, so with this dress she's a S281SC,
drop the dress and i would say a S281 Extreme
-
and Kuwait, don't forget that we started the whole drag racing, street racing thing here in kuwait back in the 70s where UAE started in the mid 90s.
-
you are welcome
-
heeey, why calling 6-8 companies when we have you Grumpyvette here on this forum??
-
this is the link for the chevy pullies, not sure which one will work best for you since i'm not a chevy expert at all
hope this will help you
-
ok, i have a 302 ford but a belt is a belt and a pully is a pully
i'm running a Vbelt with the ribbed side on the flat water pump pully, i dont think it will fail or throw the belt, but it will slip alot giving that squeeky annoying noise whenever you start the car or rev it.
here you can see how the belt marked the WP pully
installed
i would recommend that you buy a water pump pully with grooves, that's what i did, i ordered mine from summit and its about 79 bucks. http://store.summitracing.com/partdetail.asp?autofilter=1&part=MCH%2D2004&N=700+0&autoview=sku
check them out.
-
another question, can i buy an aluminum drive shaft and weld this adapter to it??
-
thank you Brian
-
guys,
no one has an idea? anyways, i ordered the part from JTR, should recieve it here in Kuwait next week and than i'll be able to know if it fits or not
thanks again
-
looks like a well built car, was thinkin about buying it and bringing it here in Kuwait, how much it's worth??
-
Hi Kevin,
i have a question about the ford ITB setup, do i need a special wiring harness?? or the stock one would work? never had ITBs before so i have no idea about wiring them. if the stock harness works, what would i do with the plug that goes to the MAF sensor??
would you explain it please.
-
hi guys,
was wondering if the JTR part #DAT-110 would fit on a stock 1988-1993 mustang drive shaft?? it uses a 1310 u joint, same as the ford's joint but just wanted to make sure.
thanks
-
palauoriginal, more photos please, cars looks awesome.
-
http://www.thezstore.com/page/TZS/PROD/WWC19/25-1129
those are dished but they aren't 0 offset, they require adapters . i know they look good on a Z, a friend om mine has a 1JZ 240Z with those wheels on it, it looks awesome.
Also, try VOLK's site if your willing to pay 450 bucks a wheel.
-
-
ok guys,
i'm leaving the Hybridz.org for good, i have to join that forum.
-
it would never be cool, at all, no way.
-
The front end of them kind of throws me off but other than that I like them. Sold a Ford for a Chevy? Do you not like the new Fords or what?
well, no not really, dont like the new Fords at all, i'm a ford guy though, with a 1989 mustang, 1993 mustang (sold), a 302 powered Z and my old F150. i love Ford but not the new trucks, if Ford come up with a new lightning, its another story
-
FlatbackZ........i'll make you feel better, i got mine for 5000 bucks here in Kuwait with rust, blown engine and on a trailer (not running)
-
holly $hit, car looks awesome, never thought a green Z would look this good
post more photos please
-
welcome here,
hope to see photos of your car, i own a 1977 280z too
you'll find suspension parts on these two sites, from basic parts to full racing parts.
i live in the bay area, but Kuwait bay area
-
thank you Joe
Brian Lanes 302 kit
in Ford V8Z Tech Board
Posted
hey guys,
am back after 5 years maybe LOL
been busy with life and left my Z alone for few years, now its time to get back to her...
just a small question about Brian's engine cradle...did any of you guys install it with an EFI engine?? i just wanna know if its possible to run EFI with the stock hood.
cheers
Ali