icesky

boodlefoof, I was wondering after you cut and weld everthing, was it all even? My friend chopped his Z recently and it came out a little cockeyed. I was wondering do you recommend for me chopping my Z. Also what tools did you use on measuring and cutting? Thanks

Hope this isnt jacking your thread, but I was wondering what youi guys used as your poppers for your doors, cus mine just look fugle

Hey, I was wondering if there was a way around the glass situation on the 240 after you chopped it. After calling a few places for lexan with diamond coating, it came out to around 1000 after shipping, any way I can save some dough, maybe someone can point me to a place I can buy lexan sheet with uv protection, scratch residents for a good price?e glass situation on the 240 after youi chopped it. After calling a few places for lexan with diamond coating, it came out to around 1000 after shipping, any way I can save some dough, maybe someone can point me to a place I can buy lexan sheet with uv protection, scratch resistents for a good price? Thanks Again

Well based on my exerience I tryed using cold weld by Lord for my shaved doors, and shaved tail markers and they bulged out after a year or so! Sorry to be bummer on your plan. Also welding isnt that bad its just settings and using halfway decent machinary.

HI, I was wondering if there was anyway to get rid of the fumes from solvent, and paint. I have tried several filters, and the smell was still quite strong? Any clues since I want to paint my car in my garage and my neighbors, would probable call the cops on me for the fumes? Help Please:) Thanks

Thanks Ak-Z Seems like your helping me on more then one post. I deeply appreciate your time and effort.

Hi, I was wondering if there was any way to remove a gash on one of my door, without stripping the paint? I was thinking of thinning the metal on the back of the section that contained the gash(12inchs long), and pushing out and tapping it back and forth with a rubber hammer. Please tell me if this is completely the wrong method to go about fixing my door? Also on side note I have several ding on my car and thinking of using duramix and slide hammer to pull them out, but cant seem to find the right type of duramix. Thank you

Thanks I aprecciate the help

Hey, Do you have any more pics of that car!!It looks bad(good)!!!!! Also do you have any detailed pics of the windsheild?

Yeah, I posted on Zilvia but at least from my experience, there solution to everything is sr20det, and drifting. I hope this post doesn't offend anyone, this is just based on my experience.

Honestly, I dont want to have to deal with the wiring into my 240z.

Hey, I was wondering if anyone could help me out with my dilemma I have a ka24de, and want to carb it, but I have one problem, the coilpack is built into the distributor. Can anyone out there help me with this issue? Thank Again

Thanks but.. Not the manga, the vid. I believe where he races a gold r33.

Anyone know where I can Midnight Wangan 2 I think it came out ten years ago? I didnt really like the first one(but thanks for the link), but loved the second one. Thanks

Oh, O forgot the LSD is coming out of a 7mgte with 3.91 if that helps? Anyone know of a person that has this done this swap? Also the reason I am planning on putting lsd in my car is due to the fact I popping in 7mgte in my car.

Hey, I used the search function and couldnt find anyone that had succesfully pulled off putting a supra lsd into a Z. I was wondering if anyone has done it yet? If so can you post some pick, and tell me what I need to pull it off. Thanks P.S: I found 1 guy but the picks were long gone. I think his name was Zsane

Seems like the r154 driveshaft has 23splines and the w58 and auto tranny drive shaft have 21. Hey does anyone know of a drive shaft that may fit this tranny other then the original.

Hi, I was wondering if a auto turbo, or w58 driveshaft spline fits into a r154.

Hey, I am really curious to see the progress on your chopped Z? Also a buddy of mine just chopped his 240, and it looks sick, but his jaw dropped to the floor when he found out how much the glass will cost him.

Thank you 4 the info GURU X .

I am not sure if anyone has done this before but I am in the progress of making veneer coated interior parts. I am using birch veneer and when I get into clear coating my parts they turn out to have a yellow tint. Is there any way to avoid this and get it more natural looking? I am using a transtar Clear coat. Thanks

So the places in red are ok to grind off? Just wanna make sure I have everything down correctly. Thanks Everyone

So it looks like its ok to cut of the seat brackets on the car? Gonna be fun day tommorrow! Thanks for the replies everyone

Here some new pics http://hybridz.org/nuke/modules.php?op=modload&name=coppermine&file=index&cat=12856 tell me if this help or not. Also the chair mechanisms when fully compress are 2inches. Thank you [/url]

I chose the spal 7 channel, with solonoids but I assume it will be as easy with any other kit. It took me at most 30minutes to install it.