stevechode

daily drifter i see that you are running coilovers.do you think the 16x8.25 will clear the stock suspension?

also from North Cackilaki!

these videos are just teasers:x

most defff. 50+ hp. hahaa

it dont matter what the muffler is,your NOT gonna see nowhere near 40. especially just changing a muffler instead of full exhaust. i highly doubt you will see a change of more than 10-15whp witha full exhaust on these cars....i could see it coming out of a built v8 tho.

i was looking at the reaction research 280yz quarter panels and like the looks of them. but if you just put the rear quarters on to accomadate a larger tire would it look goofy to keep the stock front fenders? anyone have any pictures?

i did as soon as i found out it wouldnt fit. i sent him pics and all. then i started talking to some people on here that have put 4l60s in and they all had to beat the tunnels on 280's. but this problem isnt included in the manual from john because they used the t56. but will the crossmember just not fit between the rails OR will it fit between and not line up to the transmission?

whats the crossmember going on? a t56 or 4l60. dont let it fool you, without beating the snot out of the trans tunnel on the passenger side, the crossmember wont fit on the 4l60. the servo and pan hits. my tunnel had to be moved a good inch or 2 in areas to claer the wider automatic

agreed with 78 280z. ive scraped it off the front aprons and about 1/4 way undermeath. you deff neat a heat gun tho, its a pain without it. if u plan to scrape the sound deadener off the floors dont use a heat gun tho. use some sort of stiff scraper and a hammer

my '76 does

ok. i have searched and searched first off. i have a 76 280z im in the process of putting an ls1 and 4l60 in. i cut off the original trans mount ears in the tunnel just like it says, BUT my pan on my trans. is hitting the passenger side of the tunnel. and to get the trans lined up with the new crossmember from jci, it needs to go more to the passenger side. this would involve some hammer time. have yall had this trouble with the 4l60?or is there something wrong with my trans mount from jci? IF any of you have a spare trans crossmember from jci around PLEASE lay it on the ground and measure how far the middle/bottom of the crossmember is from the ground. mine measured 1 3/4 inch from the ground. any help with this is really appreciated. its really holding me up.

im likin that color. looks like gold would work well with this color.

ok. got the ls1 and 4l60 in it 2day. i have to get another trans. crossmember because that one WILL NOT fit. should be in next weeek, done called the guy. but its in other than that. overall i was pleased with the out come.

got the painting done, front suspension back underneath it, and the ls1 mounts installed. the camera dont do justice for the color. the color actually looks identical to the color on this rx7 when u seen it in person.

yea it is a bit on the corner. the hood fit good the way it was before. if i have 2 straighten it any ill do when lining the hood up to the fenders.