Jump to content
HybridZ

nish

Members
  • Posts

    134
  • Joined

  • Last visited

Everything posted by nish

  1. You can replace the link between the front and back sections with 1/4" heim joints and hex tube.
  2. Thanks to all who responded, the need has been filled by a friendly Hybrid Z member.
  3. Thanks to all who responded, the need has been filled by a friendly Hybrid Z member. My hatch is swiss cheese, so I need one that is not rotted. Some minor rust is OK, but no holes. I don't need glass or any hardware, but I'll take it if you don't want to remove it. Looking to keep this economical, so shipping is probably not possible. My car is a 77, I believe 72-78 hatches will work. Thanks
  4. From what I've read doors from 77 or 78 would work.
  5. @az240z I just need the shells, but I am going to guess that shipping would be prohibitively expensive to 16056. Thanks for replying.
  6. They are most likely .125 pitch and even McMaster doesn't carry them in larger sizes. Try looking for JIS spec automotive hardware.
  7. My doors aren't worth fixing if I can buy yours for a reasonable price in the Pittsburgh area. Let me know, Thanks
  8. nish

    Like a Phoenix from the iron oxide

    I'll rebuild this car if it's the last thing I do.
  9. From the album: Like a Phoenix from the iron oxide

    Using a drywall repair trick to tack patch in place. The lead didn't help the welding process.
  10. From the album: Like a Phoenix from the iron oxide

    Even this high up the body the rot destroys
  11. From the album: Like a Phoenix from the iron oxide

    Hardboard template for main hoop of roll bar
  12. From the album: Like a Phoenix from the iron oxide

    Adding filler gusset for strength and aesthetics.
  13. From the album: Like a Phoenix from the iron oxide

    Fill in panel pattern created by making a rubbing of edges with a file folder and dirty hands.
  14. From the album: Like a Phoenix from the iron oxide

    Leveled off repair area on passenger rear quarter.
  15. From the album: Like a Phoenix from the iron oxide

    Dog leg finished. Bottom edge is 1/8" plate for jacking.
  16. From the album: Like a Phoenix from the iron oxide

    Rocker dog leg panel attached. Partially formed tricky part to fill in wheel well.
  17. From the album: Like a Phoenix from the iron oxide

    Adding passenger sub-frame connector.
  18. From the album: Like a Phoenix from the iron oxide

    Preparing to recreate passenger firewall.
  19. From the album: Like a Phoenix from the iron oxide

    Not much left of the hood hinge area.
  20. From the album: Like a Phoenix from the iron oxide

    Closing off the bottom of rear quarters before rebuilding them.
  21. From the album: Like a Phoenix from the iron oxide

    Tunnel shape traced and formed. Ready for install.
  22. From the album: Like a Phoenix from the iron oxide

    Homemade 48" brake and the start of the passenger floor. Metal is 20g CR.
×
×
  • Create New...