-
Posts
304 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by shika805
-
-
Hey guys,
I'm hoping this is the right section to ask this question. Ive been trying to find some original zg fender mirrors for my car for some time now and I've had no luck. I've tried searching the classifieds on many forums and tried searching online. I've even tried ebay and found some replicated fender mirrors but nothing close to the original zg style mirrors. No one seems to carry or sell them that much anymore? and when I do find a seller, someone beats me to the punch. I've found a few old posts, but they've all been sold. So for all you "zg fender mirror guys" where were you able to find your fender mirrors? I am entering my car in its first car show next month and this one of the finishing touches to my car. Any help with this is appreciated. thanks
Zack
-
sick wid it! love them man! good job~
-
shika did you head on base (camp pendelton) this morning driving the z? because i could have sworn i saw that car heading in from the oceanside gate
naw man, i was in delano CA this past weekend, i was driving my rx7. Wasnt me man.
-
thanks for the compliments guys
@rimal: yeah man, i couldn't wait anymore haha... i was surprised myself how fast everything was coming along! get yours running man!!! its your turn to show off you car!
@icapture: that was a debate i always had for the car. all my buddies didnt want me to do it, but i changed their mind when they saw it done haha..
-
i'll post some updated photos
-
i did what bobby C did, with the ground control kit you can adjust your ride height but you really need to be careful not to drop it too low, you might bottom out your struts. That is the risk you take, if you know how much travel you have and what ride height is acceptable then you can be safe.
-
i think the S30 is too round to do a panda theme? hmmm
-
it looks cleaner, but i was about to say it might be difficult to remove if you ever have to access the cross member?
-
that depot lip aint bad if it was properly fitted...
that first post, i would have to say its a custom lip
-
-
this was my problem too with my car. have you checked your pistons in the carbs? do they move fairly freely up and down? timing could be the issue also for the rough idling, gaps on the spark plugs?? is your electric fuel pump assisting your mechanical fuel pump or are you running straight to the engine? The issue with my car was that the mechanical fuel pump was causing restriction to the carburetors. Once i connected the electric fuel pump directly to the fuel line, i had no problem with fuel starvation.
-
not bad looking...
-
^not at all, there is insulation between the gas tank and the wheel well, i also reinforced the L mounts from the outside and inside to secure the sub encloser. Its a snug fit and on top of that there is a silicone lining within the creases and small gaps
-
i have another thread that explains this i will post it later.
-
i like, i like
-
looks like my kit that i bought from ebay, its a great kit. carpet over vinyl anyday, good work man
-
i saw that silver one already, that looks more what i want to with my fender and bumper.
-
does anyone have any photos?
-
i was looking for bigphil's green z, cant find it anywhere, maybe i'll just message him?
-
also thanks for the compliments guys
-
^ that is where my issue is also
yes did cut and and properly fit the zg flares... took off about 1 1/2in to 2in off the fender to install the zg flares. the tire is rubbing against the lower part of the fender and the top part of the air dam bumper where it is connected to the fender.
how did you guy re do your bumpers to make them fit
-
hello fellow hybridz'ers
running into a little problem with turning ratio. having an issue with tire fitment in the front with my WATS, i know this has been discussed before, but i cant find the thread. Tried searching but no luck. if anyone knows the link that would be awesome or any advice what to do is appreciated.
i'm running 245/45/16 in the front with 16x9 wheels, zg flares, tokico MR2 struts, sectioned to fit w/ground controls. here is the current photo attached.
Debating if i should cut the fender to fit or got with more of a stretch tire (smaller tire) to fix the the turning ratio?
thanks again guys!
-
yo here is my thread, less than $20 to install. just spent a lot of time thinking about it. good luck
-
identical to mine... my car was produced in 10/70 so this what came with mine
ZG fender mirrors! where to find, having trouble.
in Body Kits & Paint
Posted
thanks guys for all the help!