DatsunATX

Anyone else have any thoughts on this cuz im gonna undertake this eventually. Me and a freind are gonna bag our Z's

Im from Austin and ive got a z for sale maby two

Any info yet? I found out its from a 2000 honda oddessy. Any info is welcome.

honda oddesys accords all 2000 and up

i was wonderind if anyone knows anything about the in dash GPS in the new hondas like size weight and any accesories

Poundz9oh9 Im with topless, that is the finest hood ive ever seen or liked on a Z other than the stock look. it remindes me of a Ferrari 550 Maranello hood and i want it. real bad

I just purchased a 1984 chevy pickup with 305 and auto trans. The truck starts out from a stop in 1st then shifts into 2nd normaly but at 25mph shifts back into 1st. I have already replaced the pan gasket and filter and checked the plastic governer drive gear and it is fine, what am i missing?. I really dont want to take it to a shop, so any pros on the 700r-4 please chime in thanks.

http://www.speedwaymotors.com/product.ASP?wc=true&strBase_List=&hilt=&source=&base_no=91061008&str_base_no=91061008%2C91064199%2C&header_title=Keyword+Search&page_name=search%2Fkeyword%5Fresults%2Easp&search_type=hid&search_option=Exact&deptsearch=&deptSearch_id=491&dept_id=&dept_id_p=&dept_name=&dept_name_p=&ShowImages=yes&sq=0&cont=1&intPgNo=1&redirect= Expensive

The main thing i would get if i had an unlimited money pool is the Mine's BNR34, A super built and balanced RB26DETT, I have video of a skyline with one of these engines in it and it's insane, It even scares race car drivers. "The engine is fast, the brakes are strong... why is this so fast? This is unbeatable"-Orido Oh yeah i would also put the whole R34 GTR drivetrain in it too.

HeHeHeHeHe 8)

I vote C4 but that me

I like it but i second that it has flush fitting cnc'ed grill but the Z should stay IMO

Blueovalz I still find the rear of your Z to be the most breathtaking Z rearend of any ive seen ever

Man i shoulda never posted it

Sweet,sweet,sweet!!!!!! thanks

Thats what ive heard but what can you do I mean they are British.

http://www.tremek.com/forum/showthread.php?t=3373

Here it is, long download though http://www.sleepy-fish.com/sleepy/Top_Gear_Corvette_hi.wmv

They look like they are pretty close to the floor

Thanks for the tips guys, Im gonna go with some kind of Porsche seat they have the motors built in to the bottom all it needs is power. But ill definitly measure twice and make sure every thing on the brakets are square and equal again thanks.

Do you think that i could make these fit and power the seats properly and safely They are 98 Porsche 993 full supple leather seats, driver and passenger are 12-way full powered, heated The main thing that i want is all the buttons to work

No words can explain

Welcome to the fourm you'll find it to be incredably helpful

1977 280Z 6.0L LS6 45O BHP / 430 lbs ft of torque Compression 10.5: 1 Blueprinted LS1/ LS6 block LPE prepped LS1 connecting rods JE Forged aluminum pistons LPE prepped LS1 crankshaft Computer balanced rotating assembly Heavy-duty main and rod bearings LPE CNC ported & polished LS1 cylinder heads Stainless steel one piece over sized valves Custom designed LPE hydraulic roller camshaft HD hydraulic roller lifters & pushrods Competition Cams valve springs LS1 roller rocker arm assemblies Special three-angle valve job Checking of spring tensions and heights LS6 intake manifold, fuel rails and injectors LS1 harmonic balancer assembly Ported LS1 throttle body – mechanical 160 - degree thermostat Supporting sensors, coil pack assemblies Spark plugs, plug wire set, oil & filter LS1 front cover, rear cover, valve covers & oil pan Professional assembly & blueprinting of the engine C5 Corvette Intercooled Supercharger

That works really good, Putting a bunch of magnets together in a kind of sheath over the oil filter helps alot too. Another thing with magnets that is fuel related, You can do the same around the fuel filter it isnt that effective over short time but it helps in the long haul.