dmanzo57
-
Posts
194 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by dmanzo57
-
-
The speedo gears for the 200-4R are available
from a GM dealer. Check out TCI's tech info
site...
http://www.tciauto.com/tech_info/index.htm
...lots on good info on auto trans
dimensions, gear ratios, speedo gears, etc.
Don
-
Edelrock used to have the dimensions of most
of their manifolds on the web. I can't find
it now...
I'm running a Performer RPM intake with a
Performer RPM Q-jet carb(850 cfm). I use a
Moroso drop-base air cleaner with a 3 inch filter.
I,ve got the JTR mounts, including the spacer
between the front crossmember and the frame,
and everything fits well.
Don
-
Thanks, Pete. I knew someone had to have figured this out the hard way already.
Don
-
Can anyone tell me which radiator hoses will
work with the '85 Camaro radiator and the JTR
SBC engine mounts? I would prefer a molded
hose over a flex hose.
I am real anxious to fire up the engine after
spending so much time and money piecing it
together and installing it.
Thanks,
Don
R-200 install questions...
in Drivetrain
Posted
I recently finished this swap on my '72 240z. The R200 mustache bar fits behind(towards the rear of the car) the 2 brackets that run vertically from the body to the lower control arm bracket.
I had previously mounted my fuel pump to one
of the vertical brackets. I had to move the pump when I installed the R200.
There's a good picture of the rear suspension in the JTR manual that shows how the R200 is mounted.
Don