Neotokyo888 Posted November 17, 2011 Share Posted November 17, 2011 hello will this lsd : http://www.ebay.com/itm/OBX-Helical-LSD-Nissan-R200-300ZX-240Z-240SX-Silvia-/160632480909?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item256671248d work on a manual 1980 280zx? Also do I need more stuff to fit it on the 280zx or does it just fit? or will i need new axels .. etc.. to make it fit? I did read : http://forums.hybridz.org/index.php?showtopic=49194 but it wasnt really 280zx non turbo specific, anyways yh thank you! Quote Link to comment Share on other sites More sharing options...
JMortensen Posted November 17, 2011 Share Posted November 17, 2011 Yes. Should just plug and play, might need shims to set backlash. Go to the FAQ and I did a write up about putting an LSD into a differential. Quote Link to comment Share on other sites More sharing options...
Neotokyo888 Posted November 17, 2011 Author Share Posted November 17, 2011 tysm Quote Link to comment Share on other sites More sharing options...
macambra Posted November 22, 2011 Share Posted November 22, 2011 Yes. Should just plug and play, might need shims to set backlash. Go to the FAQ and I did a write up about putting an LSD into a differential. I was under the impression, from the install thread, that the axles needed to be changed to the later short nose R200 style.(25 vs 29 spline) Quote Link to comment Share on other sites More sharing options...
JMortensen Posted November 22, 2011 Share Posted November 22, 2011 A manual 280ZX will have an R200 already, so it will have the correct 29 spline diff stub axles. If you had an R180 and swapped in the R200, then the diff stubs from the R180 would be 25 spline and wouldn't fit the R200. Quote Link to comment Share on other sites More sharing options...
Neotokyo888 Posted November 23, 2011 Author Share Posted November 23, 2011 will this be plug n play for my manual 280zx? http://www.ebay.com/itm/JDM-Nissan-R200-Viscous-LSD-S13-S14-silvia-skyline-differential-rear-slip-kit-/140628742189?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item20be20502d Quote Link to comment Share on other sites More sharing options...
JMortensen Posted November 23, 2011 Share Posted November 23, 2011 No, the viscous has a different 30 spline axle. You would need the 88 300ZXT SS CV's and a Z31T CV adapter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.