slownrusty Posted January 26, 2012 Author Share Posted January 26, 2012 Does Brian's spoiler have to molded into the hatch or does it have a flat base (like the MSA Victory) or is it hollow on the underside? In this picture, is it the fitment this "gappy"? Regards - Yasin Quote Link to comment Share on other sites More sharing options...
1 tuff z Posted January 26, 2012 Share Posted January 26, 2012 Yasin, I've only done a quick test fit so really can't say just yet. Unfortunately my garage is not heated and current temp is about 20f. Too cold for me to get motivated enough to spend any real time there... Quote Link to comment Share on other sites More sharing options...
DevilZX Posted January 26, 2012 Share Posted January 26, 2012 Ahh..got it bro! DevilZX - Did you attach your spoiler with the supplied nut and bolt or 3M double sided trim tape? Yasin I used the supplied bolts. I had already attached the smaller BRE style spoiler before using the bolts so it seemed natural to use them on this one. They lined right up. Quote Link to comment Share on other sites More sharing options...
slownrusty Posted January 26, 2012 Author Share Posted January 26, 2012 Yasin, I've only done a quick test fit so really can't say just yet. Unfortunately my garage is not heated and current temp is about 20f. Too cold for me to get motivated enough to spend any real time there... No probs..cold garages are not fun! Can you comment on the base of the spoiler is it flat like the Victory where you can mount it using two way tape or is it open \ hollow with no base and has to be grafted into the hatch. I used the supplied bolts. I had already attached the smaller BRE style spoiler before using the bolts so it seemed natural to use them on this one. They lined right up. Great thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.