RebekahsZ Posted May 8, 2012 Share Posted May 8, 2012 (edited) As above. I need to get larger nuts ordered pronto if they are not the same size, so I can get diff installed on Saturday. (OK, I'm in bed being lazy and I don't want to go down and jack the car up, pull a nut and check). I figure order needs to go out tomorrow early with expedited shipping. I hope the moderators can take a joke. Edited May 8, 2012 by RebekahsZ Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted May 8, 2012 Author Share Posted May 8, 2012 OK - went down stairs, jacked up car and pulled an R180 diff mounting bolt - darn-it! Another road block. It ain't the same, (the R200 stud is lots larger) and thread pitch looks pretty fine, so I don't expect to find one at my local hardware store. Back to the internet to pay $10 shipping on a $5 part! Local Nissan dealer might be worth a call.... Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted May 8, 2012 Author Share Posted May 8, 2012 Bolt depot only has course thread pitch, so I just ordered from Blackdragon. Quote Link to comment Share on other sites More sharing options...
Aero Z Posted May 8, 2012 Share Posted May 8, 2012 Did you check the local Fastenal or Grainger? What was the nut size (Diam/pitch?)? Bolt depot only has course thread pitch, so I just ordered from Blackdragon. Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted May 8, 2012 Author Share Posted May 8, 2012 I don't know for sure. It is more than 12mm and looks to be 1.25 pitch. My fastenal is pretty limited on the metric fine thread stuff. I ordered from black dragon. Com. Needed some other stuff from them anyway. Quote Link to comment Share on other sites More sharing options...
Zmanco Posted May 9, 2012 Share Posted May 9, 2012 I have to replace one and the consensus here is that it's 14mm x 1.5. Hoping my local Ace has one. Quote Link to comment Share on other sites More sharing options...
NewZed Posted May 9, 2012 Share Posted May 9, 2012 Isn't that a typical lug nut size? Quote Link to comment Share on other sites More sharing options...
rossman Posted May 9, 2012 Share Posted May 9, 2012 Try Courtesy or your local Nissan dealer. I got my spindle pin nuts from Courtesy, guy said they use that same nut on late model cars. Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted May 9, 2012 Author Share Posted May 9, 2012 If it is 14X1.50 bolt depot has them cheap. I didn't order from them because the pitch looks more like 1.25 to me but I may be wrong. I would just use the pitch gauge in my tap set but I have been fooled by it before. I got confirmation emails from all the vendors I ordered from last night so hopefully I will be ready by the weekend. Thanks guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.