milesz Posted July 1, 2013 Share Posted July 1, 2013 I have a 240z and just cut the passage side spring 1 and 1/2 coils and button everything back together. Got in to move the car to do the other side and it seems like something is dragging preventing it from moving. I jacked the car up again and spin the wheel, all good. I can not find anything that can cause this problem. Anyone else had this problem? Thanks Quote Link to comment Share on other sites More sharing options...
motomanmike Posted July 1, 2013 Share Posted July 1, 2013 ummm are your tires rubbing Quote Link to comment Share on other sites More sharing options...
johnc Posted July 1, 2013 Share Posted July 1, 2013 Are you running a AZC big brake kit in front? Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted July 1, 2013 Share Posted July 1, 2013 What are you thinking about johnc? Quote Link to comment Share on other sites More sharing options...
srgunz Posted July 1, 2013 Share Posted July 1, 2013 Front or Rear? Quote Link to comment Share on other sites More sharing options...
milesz Posted July 2, 2013 Author Share Posted July 2, 2013 Ok, I thank eveyone for their thoughtful responses. I am embarassed to tell you guys what was making that noise. As I said, I was trying to move the car but it would not move. I jacked the car up and checked the tire and it was fine. I tried it again, still would not move. The following morning I decided to cut the other spring while waiting for a friend to come and help. I could not find the spring, so I decided to check under the car and low and behold there it was. The spring was trapped under the car was making the noise. Again, I am embarassed. Quote Link to comment Share on other sites More sharing options...
Meph Posted July 6, 2013 Share Posted July 6, 2013 Those are the best problems! Quote Link to comment Share on other sites More sharing options...
milesz Posted July 8, 2013 Author Share Posted July 8, 2013 The car rides so much better without the front lowering springs. By cutting 1/12 coil off I got the ride height I wanted and the comfort I need. Quote Link to comment Share on other sites More sharing options...
9rider Posted July 27, 2013 Share Posted July 27, 2013 OP: Do you have any bump steer problems? Or do you have the bump steer spacer install? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.