75 280z bleeding brake rotation

[Zmanj87]

Need to bleed the brakes looked everywhere for the bleeding rotation start and end

[Nigel]

Driver's side rear then passenger side rear.

Passenger side front then driver's side front.

 

Is this not in the service manual?

 

Nigel

[Zmanj87]

It might be but. Went through it twice and just tells you how to bleed not where to start and end

 

thanks Nigel!

[Nigel]

No problem. Maybe it was the Haynes manual I read it in. They tend to provide more basic info. Regardless, the rule of thumb is to start farthest from the master cylinder. Strangely enough, that turns out to be the driver's side rear if you look at the actual line lengths.

 

Nigel

[NewZed]

It's in there but it just says "Bleed air as follows;  Rear wheels --> Front wheels" .

[RebekahsZ]

Doesn't matter. Front and back are separate reservoirs and totally separate systems. I recently bled mine. I did the drivers rear first and when I got to the passenger rear there was like one tiny bubble in it.

[m1ghtymaxXx]

Rule of thumb is to go from furthest to closest to the M/C, since the lines run along side the passenger side, the sequence is as mentioned above.