Mike Mileski Posted October 11, 2013 Share Posted October 11, 2013 So, I have 1 1/2" sectioned struts on my '71 240 and am using the Illumina BZ3015 in the rear (made for the front of 240Zs) and the BZ3099 in the front (made for the rear of 87-89 Toyota MR2s). I noticed some leakage on the rears and figure I'd like to replace all of them. So, what quality adjustable strut inserts are readily available that will fit these cars? I can't seem to find any. Mike Mileski Tucson, AZ Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted October 11, 2013 Share Posted October 11, 2013 I have one blown BZ3099 in a front tube (it dumped its oil about ten years ago and I've been driving it that way with zero rebound dampening since). I'm finally doing something about it and buying a set of koni 8610-1437s all the way around. I'm buying from johnc. At 13-ish inches long, hopefully they are about the same length as the bz3099. I will use a spacer in back to make up the difference in tube length. I will be selling my 3 good BZ 3099s after I remove them. It will be a few months. Quote Link to comment Share on other sites More sharing options...
Phantom Posted October 13, 2013 Share Posted October 13, 2013 Look at what Koni has to offer. I have a set on my car and they seem to be pretty good so far. Quote Link to comment Share on other sites More sharing options...
The Infidel Posted October 14, 2013 Share Posted October 14, 2013 Sent you a pm Quote Link to comment Share on other sites More sharing options...
grey280 Posted January 4, 2014 Share Posted January 4, 2014 I know this topic is a little old but I'm having the same issues with finding a site that has the BZ3099 models (I've tried 6). I don't have the budget to go with the Konis just yet. Any recommendations or does anyone have 2 sitting around they don't need? Quote Link to comment Share on other sites More sharing options...
mossy74 Posted January 6, 2014 Share Posted January 6, 2014 I didn't realize the tokicos were hard to get now but if you used the strut sectioning as in the FAQ section couldn't you just use the koni sport mr2 equivilent to the BZ3099. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.