robhenry2990 Posted February 13, 2014 Share Posted February 13, 2014 I know that the is an overplayed post but after a few hours of running in circles I'm fed up with searching. I've read that the 280z has electronic ignition is this true? I thought about doing the crane ignition and coil ( http://www.thezstore.com/page/TZS/PROD/classic11g/12-4002 ) But it says it needs a different reflector wheel and pick up coil. What should I use? I also thought about doing the 28Ox E12-80 distributor with this but having a hard time finding one. Also how hard and expensive is a cop setup Quote Link to comment Share on other sites More sharing options...
NewZed Posted February 13, 2014 Share Posted February 13, 2014 Why change? Might be getting ahead of yourself. Reluctor > reflector wheel. Funny. Quote Link to comment Share on other sites More sharing options...
robhenry2990 Posted February 13, 2014 Author Share Posted February 13, 2014 Haha I didn't even realize I did that lol. Its says to remove the reluctor and pickup coil. Now does it need to be replaced or just removed? I'm sorry if these are idiotic questions. Quote Link to comment Share on other sites More sharing options...
NewZed Posted February 13, 2014 Share Posted February 13, 2014 Have you even had your distributor cap off yet? Your mission makes no sense. What's wrong with what you got? What are you trying to do? Quote Link to comment Share on other sites More sharing options...
robhenry2990 Posted February 13, 2014 Author Share Posted February 13, 2014 I want to upgrade the spark. I want to get rid of the ballast. Am I overlooking something? Is this setup plug and play? Quote Link to comment Share on other sites More sharing options...
NewZed Posted February 13, 2014 Share Posted February 13, 2014 Sorry, but you're going to have to do more searching and studying just to get to the the point where you can ask a good question. Good luck. Quote Link to comment Share on other sites More sharing options...
robhenry2990 Posted February 13, 2014 Author Share Posted February 13, 2014 Ok how bout this then the crane ignition system is it just plug and play? Or do I have to get something (other than a coil) to go with it? Quote Link to comment Share on other sites More sharing options...
NewZed Posted February 13, 2014 Share Posted February 13, 2014 For you, plug away. Not much play. Read the instructions. Looks like you might be stuck with the ballast. http://www.cranecams.com/uploads/instructions/9000-0700_.pdf p.s.- "crane xr-700" in Google found the page above. Quote Link to comment Share on other sites More sharing options...
tamo3 Posted February 13, 2014 Share Posted February 13, 2014 Why not just get MSD-6AL? Quote Link to comment Share on other sites More sharing options...
robhenry2990 Posted February 14, 2014 Author Share Posted February 14, 2014 I am I just order the MSD-6AL 6420 and a blaster 2 coil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.