turbobluestreak Posted October 22, 2002 Share Posted October 22, 2002 I would like to make it into the 12's by spring I'm putting the car up for a rebuild and want to make it a 3.0L stroker but I don't know what combiation of parts I should use to acieve this and I was woundering what eles I should do. Oh just to let you know I'm running the 300zx turbo ecu tbs Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted October 22, 2002 Share Posted October 22, 2002 LD28 crank, 240 rods, and I think the ZZ22 piston. Not sure on the piston, others can tell you. Spend the money and get forged pistons. You will of course have to have the whole bottom end balanced, and I would run the ARP rod bolts. I also had my rods prepped like in one of the datsun hotrodding books. They were polished, shotpeened, bushed, and I had two oil holes drilled in the small end of the rod to help oil the pin. No issue's so far. It will be fun when you finished. Quote Link to comment Share on other sites More sharing options...
SleeperZ Posted October 22, 2002 Share Posted October 22, 2002 On the other hand, you can do 12's lots cheaper, but perhaps less reliably. The JWT 300ZX ECU with 420cc injectors, a good intercooler, and a bone stock motor will get you 12s, and high 11s with slicks. It all depends on where you want to spend your money. Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted October 23, 2002 Share Posted October 23, 2002 Oh yeah I forgot to mention, you have to let Norm drive it. Quote Link to comment Share on other sites More sharing options...
turbobluestreak Posted October 23, 2002 Author Share Posted October 23, 2002 who is norm? Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted October 23, 2002 Share Posted October 23, 2002 The 12 second SU equipped NA 240 guy. Quote Link to comment Share on other sites More sharing options...
Guest norm[T12SDSUD] Posted October 23, 2002 Share Posted October 23, 2002 What turbo? You've never heard of me? I'm famous or infamous as the case may be ,didn't you know? LOL j/k Later,norm Quote Link to comment Share on other sites More sharing options...
turbobluestreak Posted October 23, 2002 Author Share Posted October 23, 2002 yah have you ever broken a shifter off at the tranny. my friend drives in car like really hates it. I he has a 87 conquest and with like porting upping boost, and a first gen mas he's in low 14's. tbs Quote Link to comment Share on other sites More sharing options...
Guest norm[T12SDSUD] Posted October 23, 2002 Share Posted October 23, 2002 Hey turbo, I have broken so many parts in my 7 years of drag racing I wouldn't know where to start.LOL My two best examples though would be the Two 2.8L cranks I broke in two and my clutch explosion which took out the entire forward bell housing along with the starter, flywheel, brake, clutch and fuel lines etc. etc.! When you're running 12's in the 1/4 on an N/A Z car you are really beating on it !! Later,norm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.