Wanted: wiring harness/pigtail for 280zx turbo electronic distributor or complete engine wiring

[andypurce]

I need the wiring, including connectors, for the output from a late 280zx. Turbo electronic distributor. This is the dizzy with the single circular 360deg plate with 6 x output marks at 60deg intervals which connects to the 280zx ECU and is driven by a splined driveshaft not a straight tongue. I need the 4 pin (female) connector for the dizzy end with it along with a length of the wiring. The other end is not important but preferable if you can split it out from the loom.

Alternatively I would be happy to purchase a complete "engine section" wiring loom as I can use this in stead of adding bits to my 260z loom.

Can pay by PayPal or EFT.

Thanks

Andy