Chris Duncan Posted July 14, 2014 Share Posted July 14, 2014 75 280 4 pot Mazda RX7 in front. 90 300zx 2 pot in rear looking for the 15/16 master and can't find any affordable. Does anyone have a good source? The 1" from Wilwood is affordable what would be better, the 7/8 stock or the 1"? Quote Link to comment Share on other sites More sharing options...
Miles Posted July 14, 2014 Share Posted July 14, 2014 http://forums.hybridz.org/topic/102754-a-one-inch-diameter-brake-master-cylinder-for-the-s30-z-cars/ See the brake section for more info on master cylinders. Lots of data. Quote Link to comment Share on other sites More sharing options...
socorob Posted July 14, 2014 Share Posted July 14, 2014 Do the 4 pot Mazdas bolt onto the Z strut? Quote Link to comment Share on other sites More sharing options...
Leon Posted July 14, 2014 Share Posted July 14, 2014 http://www.amazon.com/Brake-Handbook-Fred-Puhn/dp/0895862328 Quote Link to comment Share on other sites More sharing options...
wesmc Posted July 18, 2014 Share Posted July 18, 2014 They are on ebay for as low as one dollar right now. Quote Link to comment Share on other sites More sharing options...
Chris Duncan Posted July 24, 2014 Author Share Posted July 24, 2014 Do the 4 pot Mazdas bolt onto the Z strut? No, you have to cut off the stock mount tabs and weld new ones on. This is with a 2005 specV Sentra rotor. What rotor are you running on the rear with your Z32 rear caliper? Quote Link to comment Share on other sites More sharing options...
Chris Duncan Posted July 24, 2014 Author Share Posted July 24, 2014 Sorry if I asked a question already answered. I was in a hurry to make the shipping deadline for that day. I ended up with the Wilwood 1", seems to work pretty good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.