nusevad Posted April 23, 2015 Share Posted April 23, 2015 Hi everyone, I got a quick question and I did try to search, but my question is, is it necessary to adjust my push rod of my brake booster when I upgrade to a 15/16 MC? Do i need to lengthen or shorten it for the 15/16 or is it fine to bolt on? Much Thanks all! Quote Link to comment Share on other sites More sharing options...
NewZed Posted April 23, 2015 Share Posted April 23, 2015 Compare the distance from the mounting surface to the rod contact surface between the two cylinders when you do the replacement. Quote Link to comment Share on other sites More sharing options...
Miles Posted April 23, 2015 Share Posted April 23, 2015 (edited) Yes will need to adjust the push rod. There are several write ups in the brake section on how to adjust the push rod. Note if you adjust it out too far out it will lock the brakes up after a few pumps of the pedal and if it is too short you will experience a long pedal that bottoms out on the floor. Search the brake section for push rod adjustment. Go to the brake section and type pushrod into the search window in upper right corner of page. See post 11 here: http://forums.hybridz.org/topic/100010-brake-booster-and-master-cylinder-upgrade/ Edited April 26, 2015 by Miles Quote Link to comment Share on other sites More sharing options...
nusevad Posted April 24, 2015 Author Share Posted April 24, 2015 (edited) Thank you guys! +0.53'' as in inches? Edited April 24, 2015 by nusevad Quote Link to comment Share on other sites More sharing options...
Miles Posted April 26, 2015 Share Posted April 26, 2015 Yes, " = inches Or if you prefer metric, +0.53'' = 13.456 millimeters Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.