Klmykvl Posted September 10, 2015 Share Posted September 10, 2015 Hey guys, So I picked up a Clutch Master from Rock Auto and installed it but it is too short. As in it doesn't allow a full throw from my clutch pedal. Does anyone know where I could get an OEM Clutch Master cylinder that will work? Quote Link to comment Share on other sites More sharing options...
NewZed Posted September 10, 2015 Share Posted September 10, 2015 Swap rods. Quote Link to comment Share on other sites More sharing options...
rajien2 Posted September 16, 2015 Share Posted September 16, 2015 Haha.... So im not the only one who had this problem then? I spent 2 days bleeding the clutch system thinking I was doing it wrong... My solution was to take both U ends off the rods cut one in about half (horizontally) then mig weld them together extending the throw. Another thing you need to keep in mind if you do something like this is your clutch has to come back to rest at a certain point before it will build pressure when you step down. Again I would have swapped rods if the had a clip remover for that annoying retaining clip. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.